With the rapid development of electronics and information technology, there has been an increasing number of conduction equipment for fishing boats, leading to increasingly prominent problems such as overlapping of equipment functions and poor integration. Research on a low-cost conduction equipment integration system for small and medium-sized ships, especially fishing boats has become particularly important. In this paper, the current status of the conduction equipment for fishing boats is introduced, and a conduction equipment integration solution is put forward in combination with the development trend of the ship’s integrated navigation system, on the basis of the function modules of the existing conduction equipment for small and medium-sized fishing boats and through information fusion technology, software interface integration, etc. According to the solution, YimaEnc electronic charts and MFC programming technology are used to create a display interface for the conduction equipment integration system to realize the functions of navigation information display, electronic chart setting, route editing, collision avoidance calculation, etc., thus preliminarily implementing the conduction equipment integration system for small and medium-sized fishing boats. Through the research of the integration system, we are committed to reducing the bridge equipment and operating difficulty, assisting the crew to complete the driving decision, and improving the safety of fishing boat production and driving.