Based on ADAMS simulation analysis of five wheels-net hauler

Previous Articles Next Articles

Based on ADAMS simulation analysis of five wheels-net hauler

(1．College of Engineering of Bo Hai University, Jinzhou, Liaoning 121013, P. R. China;
2. School of Mechanical Engineering and Automation of Northeastern University, Shenyang, Liaoning 110819, P. R. China)

Online:2022-09-21 Published:2017-04-20

基于ADAMS的五轮起网机仿真分析

（1 渤海大学工学院，辽宁锦州 121013；
2 东北大学机械工程与自动化学院，辽宁沈阳 110819）

作者简介:何洋(1982—)，男，讲师，博士，研究方向：机电一体化技术与应用。E-mail：heyang121000@163.com
基金资助:
渤海大学大学生创业计划指导项目(201610167040)

Abstract

Abstract: In order to solve the problems of low work efficiency and frequent accidents of production safety for small- and medium-sizefishing vessels, a five wheels-net hauler was developed. In order to confirm optimum working parameters and working performance of five wheels-net hauler, working principle and force load of friction hub wheel were introduced and analyzed and the mathematical model was determined. The friction and frictional torque between the friction hub wheel and bush rope were ascertained. By applying variational design and solid modelling technology of Pro/E, the three-dimensional mode of five wheels-net hauler was established, which achieved the modelling and assembling of various components of entire hauler body. The rationality of mechanism design is verified by interference analysis. Then, the 3D model of the whole body was mapped into the ADAMS environment by using the software Mechanism/pro for dynamic simulation analysis. Based on the analysis of speeds of different motors, friction coefficient and wrapping angle between friction hub wheel and bush rope, the optimal working parameters of the machine were determined: 110 r/min for motor speed, 25m/min for hauling speed, 0.4 for friction coefficient of friction hub wheel, less than 70° for the angle between bush rope and shipboard. All parameters meet the specification and stable performance. The best work parameter for the five wheels-net hauler is Using Adams/VibrationVibration module to analyze the vibration characteristic of five wheels-net hauler, the frequency range for strong vibration was 30~40Hz. These conclusions obtained has laid the foundations for improving working performances and parameters optimization of five wheels-net hauler.

Key words: five wheels-net hauler, friction hub wheel, ADAMS, simulation

摘要： 针对中小渔型渔船起网工作效率低、安全生产事故频发等问题，研制了五轮起网机。为确定该机的最佳工作参数、探究五轮起网机的工作性能，介绍分析了该起网机的工作原理和摩擦毂轮的受力情况并建立其载荷的数学模型，确定了摩擦毂轮与网纲间摩擦力及摩擦矩的计算方法；利用Pro/E的变量化设计和实体造型技术，建立了该机的三维实体模型，实现了整机各组成部分的建模及装配，并通过干涉分析验证了机构设计的合理性；然后利用无缝接口软件Mechanism/pro将整机三维模型映射入ADAMS环境中进行动力学仿真分析。通过对不同马达转速、摩擦毂轮与网纲间摩擦系数以及网纲与摩擦毂轮的包角分析，确定该机最佳工作参数为：马达转速110 r/min，起网速度 25 m/min，摩擦毂轮摩擦系数0.4，网纲与船舷的夹角小于70°。利用Adams/Vibration模块对该机进行振动特性分析，搞清了振动较大的频率范围为30~40 Hz。所得结论为提高该机工作性能及参数优化提供了依据。

关键词: 五轮起网机, 摩擦毂轮, ADAMS, 仿真

HE Yang1，HUANG Zhilong2. Based on ADAMS simulation analysis of five wheels-net hauler[J]. .

何洋1,黄志龙2. 基于ADAMS的五轮起网机仿真分析[J]. 渔业现代化杂志.

[1]	ZHANG jing, SUN liwen, ZHOU you, SHI xinghua. Analysis of Hydrodynamic Performance of Combined Rigid Frame Cage [J]. , 2022, 49(6): 27-.
[2]	ZHAI Xuhui, CHENG Hui, LIU Changdong, HUANG Liuyi. Numerical simulation on water temperature of aquaculture waters on aquaculture ship based on heat-fluid-solid consolidated model #br# [J]. , 2022, 49(5): 15-.
[3]	ZHANG Song1,2,PANG Guoliang2,3, HUANG Xiaohua2,3, WU Yuanjin1, CHEN Xinting2, CHEN Changping1. Optimization of mooring mode and analysis of influencing parameters for ship-type truss cage [J]. , 2022, 49(5): 97-.
[4]	ZHANG Song1,2,PANG Guoliang2,3, HUANG Xiaohua2,3, WU Yuanjin1, CHEN Xinting2, CHEN Changping1. Optimization of mooring mode and analysis of influencing parameters for ship-type truss cage#br# [J]. , 2022, 49(5): 106-.
[5]	LI Na，ZHANG Bin . Research on maneuverability simulation of kelp harvesting ship [J]. , 2022, 49(4): 88-.
[6]	CHEN Leilei, REN Wanchuan, LI Jun, ZHANG Lizhen, HU Qingsong. Design and performance analysis of spiral drive device of crab pond bait boat [J]. , 2022, 49(3): 27-.
[7]	YAN Wenyan, HUANG Liuyi, LI Yuyan, WANG Gang, WU Qianli, YOU Xinxing. Hydrodynamic characteristics of rainbow trout ( Oncorhynchus mykiss ) [J]. , 2022, 49(3): 36-.
[8]	. Simulation and experimental of cavitating jet nozzle for net cage cleaning [J]. , 2022, 49(2): 18-.
[9]	LIAO Yuqi1,2, YUAN Taiping2, LIU Haiyang2, WANG Shaoming2, HUANG Xiaohua2. Influence of turntable flow channel structure on nozzle flow field characteristics of cage cleaning equipment [J]. , 2021, 48(6): 9-.
[10]	KONG Xianghong1,2, HUANG Xiaoshuang1, LIU Fan1, LI Binglin3, WANG Jingfeng3, LIU Bilin1,2,4,5, CHEN Xinjun1,2,4,5. Design and implementation of a fish symbiotic device based on bionic porpoise [J]. , 2021, 48(5): 18-.
[11]	SONG Zuchao, LI Zhenhua, LUO Erlin, NI Yang. Optimization and testing of CFD-based water jet mussel shucking devices [J]. , 2021, 48(5): 104-.
[12]	CHE Xuan1, TIAN Changfeng1, ZHANG Jun2, ZHU Lin1, LIU Xingguo1, ZHOU Yin1, CHEN Xiaolong1. Design and experiment of the Multiple Aquatic-organisms Pond System [J]. , 2021, 48(4): 17-.
[13]	SONG Liming1,2, ZHOU Wang1. Hook depth of pelagic longline based on ANSYS Workbench simulation [J]. , 2021, 48(4): 85-.
[14]	ZHAO Yu, YAN Mingliang, ZHU Jianping, WANG Kang, ZHAO Jiabin. Design of river crab shelling equipment and simulation analysis of key parts [J]. , 2021, 48(2): 83-.
[15]	XUAN Fuchen 1, XIE Jing 1,2,3, GU Zhong1. Simulation test of CO2 heat pump evaporator in aquatic product cooking equipment [J]. , 2021, 48(1): 74-.